Clear Care Cleaning & Disinfecting Solution Sterile 360 ml

How to Use Directions For Use: Always wash and rinse your hands before handling your lenses. 1. Remove your lenses one at a time and place them into the appropriately marked L/R domed basket holder. While inside the basket holder, thoroughly flush both lenses with Clear Care for at least 5 seconds. 2. Fill the special lens case to fill line with fresh Clear Care. 3. Place lens holder in the special case, tighten cap and store lenses for at least 6 hours or overnight (up to 7 days). Do not shake the special lens case. Your lenses are ready to wear after soaking for six hours. No final rinse with saline is necessary. Discard the neutralized disinfectant from the cup. Warnings CAREFULLY READ THE DETAILED DIRECTIONS FOR USE, WARNINGS AND IMPORTANT SAFETY INFORMATION PRINTED ON THE INSERT AND CARTON BEFORE USING THIS PRODUCT. WARNINGS: SEE INSERT AND CARTON. If you are allergic to any ingredient in this solution, do not use. KEEP OUT OF REACH OF CHILDREN. WARNINGS: Do not squirt Clear Care directly into your eyes or burning and stinging will result. Do not use flat lens case. Clear Care only works with the special lens case provided. Do not remove lenses from case for at least 6 hours. The solution needs time to neutralize. Never rinse your contact lenses with Clear Care before you put them in your eyes. If you want to rinse your lenses, use sterile saline. If unneutralized Clear Care solution gets into your eyes, it will cause burning and stinging. If this happens, remove your contact lenses immediately and flush eyes with a large amount of water or sterile saline. If burning or irritation continues, seek immediate assistance from an eye care professional. TAMPER EVIDENT: Do not use if safety seal around the bottle cap is broken or missing or if the carton is opened or damaged.